Table Of Contents

Waterproofing is one of the most significant applications in a building. Waterproofing increases the performance of a variety of building surfaces. Furthermore, should use waterproofing materials to ensure the comfort of the house or office that will use after the building is done. So, what are the ideal waterproofing materials? Which should use waterproofing materials for which part of a house?

How is Waterproofing Applied in Constructions?

One of the reasons you may be wondering what waterproofing materials are is that you can use them in your constructions. In this situation, you should pay careful attention to how waterproofing is used in houses.

One of the most common uses for water insulation is in the construction industry. Membranes and coatings are used to waterproof a building or structure, its contents, and its structural integrity.

Waterproofing Application

Waterproofing is done in layers on top of the structure to avoid water leakage and accumulation while maintaining its breathing characteristics. It eliminates the current water content in the inside frame and creates a defensive structure around itself on the outside. The building waterproofing system is typically built by erecting many barriers to prevent water from entering the facility.

Waterproofing Applications on Roofs – The building’s mainframe is one of the most common places where waterproofing is used in construction. This mainframe protects the building’s structure and roof. It guards the structure against rain, snow, and frost. The majority of roofing materials are engineered to remove water from a water-resistant roof.

Waterproofing on Walls – The waterproofing materials used for the roof and the wall insulation would not be the same because these surfaces vary from the water to which they are exposed. Vapour or air barriers must also be mounted on the walls. Moisture problems can occur in some houses when waterproofing the walls with the appropriate materials.

Different Waterproofing Methods

1. Cement Based Waterproofing Method – Cement-based waterproofing materials are readily available for various suppliers and are easy to mix and apply. Cement-based waterproofing is used in the following structures:

  • Tunnels
  • River locks/canals and concrete dykes
  • Railway and metro systems
  • Bridges
  • Water treatment plants
  • Sewage Treatment Plants
  • Dams
  • Sea cargo port and docks
  • Parking structures

2. Liquid Waterproofing Membrane Method – A liquid waterproofing membrane is a thin coating that usually consists of a primer coat and two coats of topcoat applied by spray, roller, or trowel. It is more adaptable than cement-based waterproofing systems.

3. Bituminous Coating Waterproofing Method – Bituminous coating is a type of coating used for waterproofing and a flexible protective coating. The polymer class, as well as the fibre reinforcement, may affect its flexibility and water resistance.

4. Bitumen Membrane Waterproofing Method – Because of their proven efficiency, bituminous membrane waterproofing is a common choice for low-slope roofs. It’s a self-adhesive bituminous waterproofing membrane.

5. Polyurethane Liquid Membrane Waterproofing Method – Flat roofs exposed to the elements are waterproofed with polyurethane liquid membranes. When compared to other waterproofing methods, this one is more costly.

Since polyurethane is extremely sensitive to its current moisture content, it is critical to be highly cautious when assessing the concrete slab’s moisture content before application; otherwise, the membranes can peel off or bond over time.

waterproof my roofHow do I waterproof my roof?

Excessive water could wreak havoc on your roof, which in turn could damage the house. Here are some simple ways to waterproof your roof and keep your home dry.

Add insulation to your attic – Attic insulation retains heat in the building, avoiding extreme temperature swings that can harm or warp the roof structure.

Add a water repellent layer – If you want to take a more aggressive approach to waterproof, consult a roofer about evaluating and installing this layer.

Cover seams with seam tape – For concrete roofs, seam tape is handy. To prevent water from seeping in, apply seam tape to the external roofing. To ensure a firm seal, use a lot of pressure.

Trim trees close to the roof – You can relax knowing that any falling branches won’t hurt your home if you trim your trees close to the roof.

Remove all dead leaves and branches – Rain can collect dead leaves and branches, causing water to back up and cause roof damage.

Replace missing, curling, or damaged shingles – Curled shingle can let water seep underneath your roof. The moisture can then enter your home, creating mould and mildew, which requires more home improvement.

Add heat tape to gutters and more: Heat tape warms your gutters and roof in the winter to prevent ice from forming, and that means that the roof remains stable and does not buckle as a result of heavy snowfall. This also prevents gutters from buckling or forming due to ice dams or heavy icicles. In that case, contact We Got You Covered and get a full solution to your problem. For a free estimate, call (613)-325-5535 today.

Leave a Reply